, ,

Safety Infrared Sensor Photocell MR-PC503


Active Infrared Radiation Universal Receiver 433mhz For Automatic Door

Safety Infrared Sensor Photocell MR-PC503

Photocell sensor for automatic door and gate

  1. Indoor 20m, Outdoor 10m
  2. 12-24 VDC/AC
  3. Waterproof
  4. Anti-sunlight
Infrared Frequency 1.92khz
Power Supply 12 to 24V DC/AC
Wavelength 940nm
Input r*15ma – t*30ma
Operating Temperature -20º ∼ 50º
Relay Output 1 a max *36 V
RangeRange can be reduced to 30% in bad weather conditions: for rain, dust, etc

Features:

  1. Single beam sensor/single beam detector is used for automatic slide door, coil door , garage door windows etc.
  2. Consists of a transmitter and a receiver, and the integrated amplifier can produce infrared beam. Narrow infrared beam (I or II) can avoid interruption by external light.
  3. Even installed at low height(20-40cm from the floor), the detecting distance can also be guaranteed(5-15meters).
  4. The beam produced by MICROCELL provides a self-detecting function for the sliding doors. Once the self-detecting beam is interrupted, the door will stop closing and reverse rapidly to the utmost width. The door will open until the detecting beam is resumed. When the door completely closes, the detecting beam becomes invalid.

Safety Infrared Sensor Photocell MR-PC503 Beam for Access System Transmitter and ReceiverSafety Infrared Sensor Photocell MR-PC503 Beam for Access System Transmitter and ReceiverSafety Infrared Sensor Photocell MR-PC503 Beam for Access System Transmitter and ReceiverSafety Infrared Sensor Photocell MR-PC503 Beam for Access System Transmitter and Receiver

Safety Infrared Sensor Photocell MR-PC503

Safety Infrared Sensor Photocell MR-PC503 Beam for Access System Transmitter and Receiver

Photocell sensor for automatic door and gate

  1. Indoor 20m, Outdoor 10m
  2. 12-24 VDC/AC
  3. Waterproof
  4. Anti-sunlight
Infrared Frequency 1.92khz
Power Supply 12 to 24V DC/AC
Wavelength 940nm
Input r*15ma – t*30ma
Operating Temperature -20º ∼ 50º
Relay Output 1 a max *36 V
RangeRange can be reduced to 30% in bad weather conditions: for rain, dust, etc

Features:

  1. Single beam sensor/single beam detector is used for automatic slide door, coil door , garage door windows etc.
  2. Consists of a transmitter and a receiver, and the integrated amplifier can produce infrared beam. Narrow infrared beam (I or II) can avoid interruption by external light.
  3. Even installed at low height(20-40cm from the floor), the detecting distance can also be guaranteed(5-15meters).
  4. The beam produced by MICROCELL provides a self-detecting function for the sliding doors. Once the self-detecting beam is interrupted, the door will stop closing and reverse rapidly to the utmost width. The door will open until the detecting beam is resumed. When the door completely closes, the detecting beam becomes invalid.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Safety Infrared Sensor Photocell MR-PC503”

There are no reviews yet.

Hello! Do you have question or suggestions? We are glad to answer your Question anytime.
MRM TECHNOLOGY
Chief Support Engineer